Posted reference ranges so you can budget before you call. Pricing is hedged throughout, and a firm quote comes after we see the job. Call or text and we will walk you through it.
Home/Pricing
Last updated: 2026-05-31.
Quick answer: In Dallas, a standard chimney sweep and Level 1 inspection usually runs $150 to $300, a Level 2 camera inspection runs $200 to $500, a new stainless cap runs $200 to $500, and crown repair runs $250 to $900. A full stainless reline runs $1,500 to $4,000. We sweep and inspect at a flat rate and price any repair only after we have seen the chimney.
A quick note on these numbers. Everything below is a reference range to help you budget, not a firm quote. Every job is different, and the only honest way to give you a real number is after a free inspection. Use the figures below to plan and to vet other contractors' quotes; call us at (469) 219-8607 when you want the actual quote on your specific job.
| Service | Usual flat price | Best for |
|---|---|---|
| Chimney sweep + Level 1 inspection | $150 to $300 | Annual cleaning before the burning season. |
| Level 2 camera inspection | $200 to $500 | Home sales, after a chimney fire or system change. |
| Stainless cap install | $200 to $500 | Keeping water and animals out of the flue. |
| Crown repair / rebuild | $250 to $900 | Cracked or spalling concrete chimney crown. |
| Stainless steel reline | $1,500 to $4,000 | Failing clay liner or gas-insert conversion. |
| Animal / nest removal + cap | $200 to $500 | Blocked flue from birds, squirrels, or raccoons. |
Chimney repair has a bad reputation for upsells, and we get why: a homeowner can not see inside the flue, so it is easy for a less honest company to invent problems. We do it the opposite way. The sweep and the inspection are a flat rate, and we run a camera up the flue when the situation calls for it so you see what we see. Most chimneys in Dallas just need a cleaning and a clear bill of health. Some genuinely need a new cap, a crown repair, or a reline, and when they do we show you the photo of the cracked crown or the spalled liner before we quote the fix. The biggest money-saver is simple: keep water out at the top with a good cap and a sound crown, because water getting in is what turns a $300 cap job into a $3,000 reline a few years later.
These ranges reflect real chimney work across the Dallas metro. We are a certified, insured chimney service, we inspect to the standard three-level system, and we show you photos of any problem before we quote a repair. We will share a certificate of insurance on request, and we will tell you honestly when all your chimney needs is a sweep and a clean inspection.
A standard sweep and Level 1 safety inspection usually runs $150 to $300, depending on the chimney’s condition and how long since the last cleaning. That flat rate covers clearing creosote and debris from the flue and inspecting the cap, crown, liner, and firebox. Any repair we recommend is priced separately after we have seen the chimney.
Usually it comes down to condition and access. A chimney that has not been swept in years, has heavy creosote, or has an animal nest takes longer and may need extra steps. A tall or hard-to-access chimney adds time too. We give a flat sweep-and-inspection rate up front, and the only thing that adds to it is a genuine repair we have shown you and priced.
Yes, if you burn wood at all. Creosote builds up no matter the climate, and a flue that has not been swept can catch fire the first cold night you light a log. Idle fireplaces also collect animal nests and debris over the long Texas off-season. Even a gas-log fireplace needs the flue checked for blockage and proper venting.
A Level 1 is the routine annual check of the readily accessible parts of the chimney, included with a standard sweep. A Level 2 adds a camera scan of the full flue and is the right call for a home sale, after a chimney fire, or when you change the fuel or insert. A Level 2 runs $200 to $500 because of the camera work and the detail.
It depends on where the water is getting in. A new stainless cap runs $200 to $500, crown repair runs $250 to $900, and tuckpointing or masonry repair runs $400 to $1,500. We find the actual entry point with an inspection rather than guessing, because fixing the wrong thing wastes your money and leaves the leak.
Late summer or early fall, before the first cold snap. Demand spikes hard the week everyone first lights a fire, and booking ahead means a faster slot and a calmer schedule. It also means any repair we find can be done before you actually want to use the fireplace, not after you have already been burning on a chimney that needed work.
Last updated: 2026-05-31.
